Main Distribution Panels

1. Fully type tested assemblies as per IEC 61439-1 & IEC/TR 61641
2. Rated current up to 6300A & rated operational voltage up to 690V AC
3. Type tested short circuit withstand capacity up to 65KA/3sec
4. Ingress protection of system IP54 As Per IEC 60529 Standards
5. Form of separation Form-2,Form-3 & Form-4
6. Modular system design of fixed draw out assemblies with fixed, plug-in &
7. Draw out breakers as per requirements.
8. Front and rear access with top and bottom cable or bus riser entry
9. Floor mounted design constructions.

Sub Main Distribution Board

1. Fully type tested assemblies as per IEC 61439-1 Standards.
2. Rated current up to 1600A & rated operational voltage up to 690V AC
3. type tested short circuit withstand Capacity up to 50KA/3sec
4. Ingress protection of system IP54 as per IEC 60529 standards
5. From of separation Form-2,Form-3,Form-4
6. Front and rear access with top/bottom cable or bus riser entry
7. Wall mounted /floor mounted design constructions

DB’s Distribution Board

1. Comply with IEC 61439-3 standards
2. Rated current up to 250A
3. Type tested circuit withstand capacity up to 17KA for 200ms
4. Row type DBs, PAN assemblies (single, split, consumer unit) with flush/surface mounted constructions.
5. Ingress protection of system IP31,IP41,IP54 As Per IEC 60529 standards
6. Complete solution in line with local authority regulations

Motor Control Centers Panels

1. Fully type tested assemblies as Per IEC61439-1 standards
2. Rated current up to 630A and rated operational voltage up to 690V AC
3. Type tested short circuit withstand capacity up to 65KA/3sec
4. Ingress protection of system IP54 as per IEC60529 standards
5. Form of separation Form-2,Form-3,Form-4
6. Modular system design of fixed, drawout assemblies with fixed, plug-in, draw out breaker as per the requirements
7. Equipped with DOL,S/D, Softstater, VFD, F/R starters controls
8. Front and rear access with top/bottom cable or bus riser entry
9. Wall/Floor mounted design constructions.

Capacitor Bank

1. Fully tested assemblies as per IEC61921 and bus bar IEC 61439-1 standards
2. Rated up to 750 Kvar
3. Multi step design of power factor correction with Microprocessor control
4. Standard and Detuned Capacitor Banks
5. Form of separation Form-2 with IP31,IP54 ingress protection as per IEC 60529 Standards
6. Self-heading capacitor, pressure disconnection and discharge resistor
7. Detuned reactor with 5.67% ,7%,14% reactance factors
8. Capacitor Voltage up to 440V AC / 480V AC

Synchronization Panels

1. 3pole or 4pole System configurations
2. Fully type tested IEC 61439-1 standards
3. Ingress protection of the system IP54 as per IEC 60529 standards
4. Form of separation Form-4,Form-3,Form-2
5. Load sharing/ load shedding
6. Rated current Up to 6300A and rated operational voltage up to 690v AC
7. Automatic/Manual synchronizing with engine start signal